Showing posts with label DIY. Show all posts
Showing posts with label DIY. Show all posts

Wednesday, 20 June 2012

made = iphone Case

Just to prove that I am a serious Pinner
(in other words I actually attempt stuff that I pin on Pinterest), 
BEHOLD:
DIY by Bee-inspired
My version
 I made this as a present for my father's day gift.  
I added an emroidered monogramme - he's called Brian hence the B.
It's not as polished as the original as it is hand sewn and I turned it inside out after hemming the sides as my stitching wasn't as neat as I'd have liked.
Another difference is I mistakenly bought a jean-like button rather than a popper and had no time to go back to the shop, so I had to create a button hole on the strap which took a while.
He loved it!
Tinkety Tonk

Monday, 11 June 2012

DIY = lino cutting

On pay day, I treated myself to some new crafting tools.
Well, you've got to haven't you?
I bought some soft cutting lino and some cheap lino cutting tools.
There were no instructions but it's not rocket science so I just waded in and...
WHOA!
I've got a new pash.
Watch and learn, kids, watch and learn:
(That's meant to be sarcastic by the way, I'm clearly not an expert, it was my first go and I nearly took my finger off - so be careful.)
Sorry about the blurry image above.  
I'm reduced to an old camera after I dropped my phone down the bog.
I LOVE learning new stuff, especially if it's as easy as this.
The possibilities are endless!
Go on get yourself some new kit and watch your fingers.
Tinkety Tonk

Wednesday, 30 May 2012

DIY = vintage style shoe clips

I've seen loads of shoe clips on Etsy.  
Some are really lovely and I've made a set before in a very different style.  
 I made the ones below for my sister's borthday for her handmade hamper last month.
Here's a step by step guide to help you make your own:
You will need: 
Thread
Vintage style fabric
Scissors
Shoe clip backs
Hot glue
Cut out two strips of fabric 2inches by 10 inches, fold them in two, (keeping the reverse of the fabric on the outside) and cut the short edges into a rounded triangle shape:
Sew them all the way round leaving a small gap.
 
 Once right side out, sew a hem stitch in the gap you left to close it.
Then cut another rectangle out of the material, 1inch by two and
sew it into a tube (inside out) along the long edge.
Turn it right side out and then sew the ends together to create another smaller tube.
Turn the tube inside out so the hems are hidden.
Fold your long piece of material not quite in half.
Feed your tube over the long piece doubled over to look like this:
Hot glue your shoe clips onto the top edge of your bow (or sew them).

You could attach them to your shoes at the front of back: 
Pretty Feet!
Hope it inspires you to make your own.
Tinkety Tonk

Tuesday, 1 May 2012

DIY = linen napkins with easy ribbon rings

What ho!
I made these linen napkins with D ring napkin rings as a birthday gift.
They were simple and stylish.
What you'll need:
Linen 50cm squared x 4
D Rings
Crossgrain Ribbon
Scissors
Needle
Thread (I used embroidery thread) 
Ruler
Here's how I did it:
Tha napkins were straight forward
I cut 50 cm squares of linen fabric 
then I just frayed the ends by removing the threads (about 2cm wide)
if I'd had more time I would have hemmed the edges but if it's good enough for Martha Stewart...
 
 
 
 

 
Tinkety Tonk

Tuesday, 24 April 2012

DIY = necklace storage frame



Hello, people.
I saw this jewellery rack in a mail order catalogue and thought I can make that!
This original from Cox & Cox is £32.
 So I did.
Mine cost about £7 - Bargain!
Here it is:
You'll need:
A Picture Frame (You've cracked the glass of an old picture frame? Perfect! Waste not, want not.)
Nice fabric
A Staple gun
Paint
Sandpaper
I needed pliers to get the old backing pins out.
A ruler (optional - to line up the hooks)
I got this beauty at the Hospice Charity Shop £4!
Mine was an old frame and had these nasty-looking sharp backing pins.  Hence, pliers.
Remove the glass and lay out the backing board from the frame onto the fabric.
Staple it securely, stretching the fabric constantly to avoid wrinkles.
I made mine pretty secure.
Now onto the frame: rub down and paint (I used a mat emulsion).
Then get your hooks.  I liked these L-shaped ones.
Screw them on.  Make sure they are tight and won't turn about.
I lined them all up using a ruler but you might want them more random.
Then re-attach the frame (those pesky pins!)
The two bead necklaces on the left are my own creations, too!



 Tinkety Tonk